Burmester B100 Loudspeakers

The B100 loudspeaker is the flagship of Burmester Speakers and was inspired by the aerodynamic design similar to the riveted wings found on large classic airplanes of the past. To re-produce the time-honoured high dynamics that result in life-like quality sound was of paramount importance during the development process of the B100.

The reference speakers truly dignify the Burmester motto of "Art for the Ear."


Custom-built with 275mm die-cast light alloy enclosure, very rigid, magnetically non-conductive, therefore, no magnetical loss

Kevlar mid-range driver with extremely high load rating, modified to Burmester specifications.

The app. 30 cm² diaphragm area is about ten times the size of conventional dome tweeters. This results in a very low crossover frequency of 2700 Hz and allows a d’Appolito configuration which guarantees very stable and transparent sonic images.

All drivers are broken in at high signal levels by Burmester Audiosysteme non-stop for seven days (woofers and mid-range drivers with 10 Hz, tweeters with pink noise). Then they are measured very carefully over their full frequency range and finally matched in pairs by computer.

Burmester B100 Loudspeakers
_MG_4854 CMYK-2

Technical specifications




Approx. 128kg (282lbs)

Power rating:

min. 250 watts

Sensitivity (2,83V):

91 dB


4 ohms

Crossover frequencies:

 160 Hz, 2.7kHz

Frequency Response (-3dB):