Scheu Analog MC Kupfer L

The standard version of MC Scheu Kupfer L is based on the successful Benz Micro Glider S series. This low-output pick-up is equipped with a Namiki micro-ridge diamond stylus tip. We are convinced of the advantages of supplying only low-output variants. The MC Scheu Kupfer L has an output of about 0.4 mV running at a speed of 3.54 cm/s.


Features!

Solid boron rod: 0.28 mm diameter

At 315 Hz at a tracking force of 2 grams: >80 µm

Our pick-up MC Scheu Kupfer L (Low) is made at Benz Micro in Switzerland.

Each pick-up is hand-made, individually measured out and audio tested.

Scheu Analog MC Kupfer L
scheu_logo_black_claim_2000

Specifications

Physical

System type: Moving Coil

Cantilever: Solid boron rod: 0.28 mm diameter

Stylus: Nude line-contact diamond, mirror polished

Stylus tip radius: 3 x 60 μm

Vertical tracking angle (VTA): 20 degrees

Coil: Pure iron cross

Weight: 6,8 gr

Electrical

Output voltage: ca. 0.4 mV @ 3.54 cm/s

Internal impedance: ca. 12 ohms

Frequency response: 20Hz – 20kHz +/- 1 dB

Channel balance: < 0.5dB Channel separation: > 35dB @ 1 kHz

Dynamic

Tracking ability: at 315 Hz at a tracking force of 2 grams: >80 µm

Dynamic compliance: 15 µm/mN

Setup Instructions

Recommended loading: 100 – 47.000 Ohm

Recommended tracking force: 1.7 – 2.0 gr

Optimum tracking force: 1.7 – 1.8 gr

Recommended tonearm mass: Medium to high

Optimum working temperature: 23° C

Break-in period: 40 hours